ORDER ONLINE OR SPEAK WITH OUR EXPERIENCED TEAM 1300 826 532 or Enquire Online | Cart | Checkout
WHAT ARE YOU WAITING FOR? ORDER ONLINE & SAVE »
CALL US NOW: 1300 826 532
Tiny home in middle of grass garden.
Can a tiny home run on rainwater? Our tiny home water supply guide shows why the roof is the weak link, and how to size your tank, pump and filter.

A tiny home water supply has three parts: a tank to store rainwater, a pump to push it to your taps, and filtration with UV if you plan to drink it. Get the sizing right and a tiny home can run on rainwater alone. The catch is that a tiny home’s small roof often can’t collect enough rain to keep up, so most setups need a second roof, a water-wise routine or the odd cartage top-up.

This guide works through each part with real numbers: how much water you’ll use, how much your roof can catch, and what it takes to make tank water drinkable.

What a Tiny Home Water Supply Needs

Think of a tiny home water supply as a chain. Each link has to suit the one next to it.

  • The tank stores what the roof collects and carries you through dry spells. Bigger storage means fewer worries between storms.
  • The pump gives you pressure at the shower and kitchen tap. Without one, you’re relying on gravity, which gives very little pressure from a tank sitting at ground level.
  • Filtration and UV treat the water before it reaches your taps. This matters most when the tank is your only source of drinking water.
  • Power runs the pump and the UV system. On an off-grid site, that means sizing your solar setup to suit.

On top of that, you’ll need a licensed plumber to connect it all up and a level, compacted base for the tank to sit on. Our water tank base preparation guide covers how to build one.

How Much Water a Tiny Home Water Supply Uses

Start with demand, because it shapes everything else. We’ve built a simple daily example using Unitywater’s appliance figures.

Tiny home water supply: daily water use per person (worked example)
Use Assumption Litres per day
Shower 5 minutes with a water-efficient showerhead (6–9 litres per minute) 30–45
Toilet 4 full flushes on a dual-flush toilet (6 litres each) 24
Taps Kitchen, basin, drinking and cooking: about 6 minutes of running tap (5 litres per minute) 30
Laundry Front loader (60 litres a wash), about 3–4 loads a week 30
Total per person Two people: about 230–260 litres a day About 115–130
Appliance figures from Unitywater’s water usage table, which it describes as a guide only. Your own use will vary.

So one person in a tiny home uses about 115–130 litres a day in this example. Two people use about 230–260 litres. For comparison, Unitywater puts its regional average at 167 litres per person per day, but that figure includes gardens and bigger households.

A few habits make a big difference. A shorter shower saves the most. A composting toilet takes the toilet line out of the table entirely. And a front-loading washing machine uses 60 litres a wash, against 150 litres for a top loader.

Can Your Roof Fill a Tiny Home Water Supply?

This is the question most tiny home owners don’t ask until the tank runs low. On a roof, 1mm of rain on 1m² gives you about 1 litre of water. A typical tiny home roof is small, so the numbers add up slowly.

Tiny home water supply: how much rain your roof can collect in a year
Annual rainfall 20m² roof (tiny home only) 40m² roof (tiny home + carport) 80m² roof (tiny home + shed)
600mm 12,000L a year (about 33L a day) 24,000L a year (about 66L a day) 48,000L a year (about 132L a day)
800mm 16,000L a year (about 44L a day) 32,000L a year (about 88L a day) 64,000L a year (about 175L a day)
1,000mm 20,000L a year (about 55L a day) 40,000L a year (about 110L a day) 80,000L a year (about 219L a day)
1,200mm 24,000L a year (about 66L a day) 48,000L a year (about 132L a day) 96,000L a year (about 263L a day)
1,600mm 32,000L a year (about 88L a day) 64,000L a year (about 175L a day) 128,000L a year (about 351L a day)
Based on 1mm of rain on 1m² of roof giving about 1 litre. Figures are before losses from first flush, overflow in heavy storms and evaporation, so expect to collect less in practice.

Here’s what that means in practice. A 20m² tiny home roof in a 1,000mm rainfall area collects about 55 litres a day on average. That’s less than half of what one person uses in our example. Even in a 1,600mm area, the tiny home roof alone falls short.

The good news is that you can fix it. In fact, there are three ways to close the gap:

  1. Add another roof. A carport, shed or deck roof piped into the same tank doubles or quadruples your catchment. Our post on turning a shed roof into a rainwater goldmine shows how.
  2. Use less. Shorter showers and a composting toilet can cut daily use by a third or more.
  3. Plan for top-ups. A water carter can refill the tank during long dry spells. See our guide to the cost of water cartage.

To check your own numbers, look up your area’s average rainfall on the Bureau of Meteorology’s climate data pages. Then run them through our roof catchment maths guide.

Choosing the Tank for Your Tiny Home Water Supply

Because the roof is small, storage does the heavy lifting in a tiny home water supply. A bigger tank catches more of each storm instead of overflowing. It also carries you further between rain.

As a guide, a 10,000-litre tank holds about 38–43 days of water for two people in our example, with no rain at all. For one person, it’s about 77–87 days. That buffer is what lets you ride out a dry month without calling a carter.

Smaller tanks still have a place. If your tiny home is connected to mains water for drinking, a 1,000–2,000 litre tank for the toilet or garden may be all you need. Our post on small water tanks covers those setups.

Before you order, check two things on site:

  • Footprint. The Duraplas R10000 round tank is 2,510mm across, so measure your space with room to spare.
  • Inlet height. The R10000’s inlet sits at 2,205mm. Your gutters and downpipes need to sit higher than that for rain to flow into the tank.

Pumping and Powering a Tiny Home Water Supply

A pressure pump turns a tank into a working tiny home water supply. The Reefe PRJ80 jet pump suits 5–8 taps, which comfortably covers a tiny home’s shower, kitchen, basin, toilet and laundry. Reefe’s technical guide lists the PRJ80E at up to 75 litres per minute and 48 metres of head.

Power is where tiny homes differ from a standard house. Reefe’s guide lists the PRJ80E’s input power at 990 watts on a 240-volt supply. The Puretec UV system uses a 46-watt lamp as well. So if you’re off-grid, give both figures to your solar installer when they size your inverter and batteries.

Wherever the power comes from, a few rules apply:

  • Reefe’s manuals say not to install its pumps without an RCD (safety switch) on the circuit.
  • Every external pump needs protecting from the weather to keep its warranty, which is why a pump cover is worth having.
  • Keep the pump easy to reach for servicing.

If your pump ever stops, our pump troubleshooting guide covers the common fixes.

Filtration and UV for a Drinkable Tiny Home Water Supply

If your tank is your only source of drinking water, treatment matters. NSW Health says a properly maintained rainwater tank “can provide good quality drinking water”. However, it also notes the main risk is germs from bird and animal droppings washing off the roof.

That’s where a filter and UV system comes in. The Puretec HYBRID-E7 treats water in three steps:

  1. A 5-micron sediment filter catches fine particles.
  2. A 10-micron carbon filter improves taste, odour and colour.
  3. A UV chamber treats bacteria, viruses and parasites such as Giardia and Cryptosporidium.

The order matters, because UV works best on clear water. For the science behind it, read our guide to UV water purification.

Two more points from NSW Health are worth knowing. First, rainwater contains no fluoride, so talk to your dentist if tank water is your main drinking source. Second, anyone with a severely weakened immune system should talk to their doctor about drinking rainwater. For more, see can you drink tank water?

A Complete Tiny Home Water Supply in One Order

If you’d rather not piece it together, the Tiny Home Plumber Ready Starter Package puts the whole tiny home water supply in one order for $5,495. It includes:

  • A Duraplas R10000 round tank (10,000 litres)
  • A Reefe PRJ80 jet pump with a 25mm brass Y strainer
  • A Puretec HYBRID-E7 filtration and UV system
  • A Polyslab pump cover

Freight is $195 in standard freight areas, and you’ll need two people on site to help at delivery. Your plumber then connects the system and confirms the final design. To compare it with our other bundles, see our pump bundle prices guide.

Looking After Your Tiny Home Water Supply

A tiny home water supply only stays safe if you keep up the maintenance. Here’s a simple schedule.

Tiny home water supply: maintenance schedule
Task How often Source
Clear the roof and gutters of leaves and debris Every 3–4 months NSW Health
Check tank screens are sealed and undamaged At least once a year NSW Health
Check for sludge in the bottom of the tank At least every 2–3 years NSW Health
Replace the filter cartridges Every 6–12 months, sooner if flow drops or sediment is high Puretec
Replace the UV lamp When the system’s countdown timer and alarm say so Puretec

It’s also worth fitting a first-flush diverter, so the dirtiest water from the start of each storm never reaches the tank. And keep the tank’s screens sealed to stop mosquitoes getting in. Our guide to keeping mosquitoes out of your water tank explains how.

Frequently Asked Questions: Tiny Home Water Supply

What size water tank do I need for a tiny home?

For a tiny home running fully on rainwater, a 10,000-litre tank is a sensible starting point. It holds about 38–43 days of water for two people with no rain, based on typical daily use. If you’re on mains water for drinking, a 1,000–2,000 litre tank may be enough for the toilet or garden.

Can a tiny home run on rainwater alone?

Yes, but the tiny home roof is usually too small on its own. A 20m² roof in a 1,000mm rainfall area collects about 55 litres a day, which is less than one person uses. Adding a shed or carport roof, using less water or planning cartage top-ups closes the gap.

Is tank water safe to drink in a tiny home?

NSW Health says a properly maintained rainwater tank can provide good quality drinking water. A filter and UV system adds protection against germs from the roof. Keep up the gutter cleaning, screen checks and filter changes.

Can I run a tiny home water pump on solar?

Yes, if your solar system is sized for it. The Reefe PRJ80E draws 990 watts while running, and the Puretec UV system uses a 46-watt lamp. Give both figures to your solar installer.

How much does a tiny home water supply cost?

Our Tiny Home Plumber Ready Starter Package costs $5,495, plus $195 freight in standard areas. It includes a 10,000-litre tank, pump, filtration and UV system, and pump cover. Plumbing, electrical work and the tank base are extra.

Set Up Your Tiny Home Water Supply Factory-Direct

The Water Tank Factory – the online sales division of Duraplas Industries – has been Australian family-owned and manufacturing since 1984 in Alstonville, Northern Rivers NSW. And the tank is covered by our 20-year warranty on all poly round and slimline tank models.

Browse the Tiny Home Plumber Ready Starter Package at watertankfactory.com.au, or call our team on 1300 826 532 to talk through your site.

50% off freight for New "Poly" Orders - for January and February 2027 delivery More Info!